고-밀도 폴리에틸렌 속성

고-밀도 폴리에틸렌 MSDS

Poly(ethylene)

고-밀도 폴리에틸렌 C화학적 특성, 용도, 생산

개요

폴리에틸렌(영어: polyethylene)은 열가소성 플라스틱의 하나로 가볍고 유연하며, 왁스와 같은 느낌이 난다.

용도

공업 재료부터 일용 잡화까지, 생활의 구석구석에서 사용되고 있는 범용 플라스틱으로, 병·포장재·전기절연체로 많이 사용된다. 석유화학공업의 인기품으로, 범용 플라스틱의 대표적인 존재로 각광을 받게 되었다.

정의

Polyethylene is a flexible waxy translucentpolyalkene thermoplastic made in avariety of ways producing a polymerof varying characteristics. In the ICIprocess, ethene containing a trace of oxygen is subjected to a pressure inexcess of 1500 atmospheres and atemperature of 200°C. Low-densitypolyethene (r.d. 0.92) has a formulaweight between 50 000 and 300 000,softening at a temperature around110°C, while the high-density polythene(r.d. 0.945–0.96) has a formulaweight up to 3 000 000, softeningaround 130°C. The low-density polymeris less crystalline, being more atactic.Polyethene is used as aninsulator; it is acid resistant and iseasily moulded and blown.
Polyethylene is a water-repellent, white, tough, leathery, thermoplastic resin very similar in appearance to paraffin wax. Properties vary from a viscous liquid at low molecular weights to a hard waxlike substance at high molecular weights. It is used as a coating for glass bottles and fiberglass fabrics (special treatments for glass are required to obtain good adhesion between polyethylene and glass) and is also used as an injection-molding material for ceramics.
In the polymerization process, the double bond connecting the carbon atoms is broken. Under the right conditions, these bonds reform with other ethylene molecules to form long molecular chains. Ethylene copolymers, EVA, and EEA are made by the polymerization of ethylene units with randomly distributed comonomer groups, such as vinyl acetate (VA) and ethyl acrylate (EA).

용도

Polyethylene (PE) is a thermoplastic polymer consisting of long hydrocarbon chains. PE is used in a number of applications including flexible film packaging produced by the blown film process. Polyethylene is used to regulate viscosity, suspension properties, and general stability in cosmetic formulations. Typical applications included specialty injection molded parts, in these fields Polyethylene has a wide range of uses:
Injection and blow molded toys, housewares and lids.
Injection molded car seats, mower parts and pails.
Injection molded, thin-walled containers and housewares.
Hot melt coating for paper, additive in cast moldings, candles, oil-based inks and hot melt adhesives.
Additive to unsaturated polyesters, epoxides and other polymers to impart the unique properties of UHMWPE. Used in industrial parts, coatings and wear surfaces at 10-40 wt. %.
Film applications having good drawdown and toughness.
Mold release additive, lubricant in rubber processing, extrusion and calendering aid for PVC and dispersing aid for color concentrates.
Bearings, gears, bushings and other moving parts.
Laboratory tubing; in making prostheses; electrical insulation; packaging materials; kitchenware; tank and pipe linings; paper coatings; textile stiffeners.
polyethylene is used to regulate viscosity, suspension properties, and general stability in cosmetic formulations. It is derived from petroleum gas or dehydration of alcohol.

생산 방법

Linear PE is produced by a low-pressure solution or gasphase process that is initiated by a variety of transition metal catalysts. The most common catalysts are Ziegler titanium compounds with aluminum alkyls and Phillips chromium oxide-based catalysts. The gas-phase and slurry processes are used to produce high molecular weight, high-density (HMW-HDPE) products. The highest density linear PEs can be made from an α-olefin comonomer, typically octene for the solution process and butene or hexene for the gas-phase process. Linear PE does not have long-chain branches and is therefore more crystalline. The short-chain branches found in linear PE serve as tie molecules, which give the higher α -olefin copolymers improved puncture and tear properties. Included in the linear PE family are ultra-low-density PE (ULDPE), LLDPE, and HDPE.
HDPE’s main use is in blow-molded products such as milk bottles, packaging containers, drums, car fuel tanks, toys, and houseware. Film and sheet are widely used in wrappings, refuse sacks, carrier bags, and industrial liners. Injection molding products include crates, pallets, packaging containers, houseware, and toys. Extrusion grades are used in pipes, conduit, wire coating, and cable insulation.
LLDPE is a thermoplastic that in many applications replaces its predecessor, low-density polyethylene (LDPE), or is used in blends with LDPE. In particular, LDPE’s shortchain branching gives it higher tensile strength, puncture, and anti-tear properties, making it especially suitable for film applications.

농업용

LDPE is short for low density polyethylene. LDPE sheets are used for lining jute bags in which fertilizers are stored. LDPE acts as a waterproofing material.

Safety Profile

Questionable carcinogen with experimental tumorigenic data by implant. Reacts violently with F2. When heated to decomposition it emits acrid smoke and irritating fumes.

Carcinogenicity

IARC reports that data available do not allow the evaluation of carcinogenicity of ethylene in humans. Rats exposed to ethylene by inhalation show no increase in tumor incidence.

Purification Methods

Crystallise it from thiophen-free *benzene and dry it over P2O5 under vacuum.

고-밀도 폴리에틸렌 준비 용품 및 원자재

원자재

준비 용품

고-밀도 폴리에틸렌 공급 업체

공급자	전화	이메일	국가	제품 수	이점
Hebei Mojin Biotechnology Co., Ltd	+8613288715578	sales@hbmojin.com	China	12452	58
Henan Bao Enluo International TradeCo.，LTD	+86-17331933971 +86-17331933971	deasea125996@gmail.com	China	2504	58
Capot Chemical Co.,Ltd.	571-85586718 +8613336195806	sales@capotchem.com	China	29797	60
Henan Tianfu Chemical Co.,Ltd.	+86-0371-55170693 +86-19937530512	info@tianfuchem.com	China	21695	55
Chemson Industrial (Shanghai) Co., Ltd.	86-21-65208861- 8007	sales1@chemson.com.cn	CHINA	117	58
career henan chemical co	+86-0371-86658258	sales@coreychem.com	China	29914	58
Hebei Guanlang Biotechnology Co., Ltd.	+86-19930503282	alice@crovellbio.com	China	8822	58
Hubei xin bonus chemical co. LTD	86-13657291602	linda@hubeijusheng.com	CHINA	22968	58
Chongqing Chemdad Co., Ltd	+86-023-61398051 +8613650506873	sales@chemdad.com	China	39916	58
CONIER CHEM AND PHARMA LIMITED	+8618523575427	sales@conier.com	China	47465	58

고-밀도 폴리에틸렌 관련 검색: